In the process of 3D printing, the deformation, warping and bending of the prototype may sometimes be printed out, resulting in the failure of 3D printing.How to prevent the model deformation?

1. Use a heated base plate:

     The heated base plate helps to keep the bottom of the initial print at the same temperature as the top, thus ensuring uniform cooling throughout the model, especially the printed ABS (suggested 110 °) and PLA (suggested 50 °) materials.

2. Calibrate the initial speed of the z-axis print:

     This is also crucial, The material won't stick to the platform If your z-axis starts too high.

3 .You can printthe base wad.

     You can set it in the printing software, and by printing the base wad that can better reduce the degree of bending deformation of the prototype

4. In the process of 3D printing, the bottom of the model becomes warped, and the model is reprinted by applying solid glue appropriately. If necessary, a suitable base is set for 3D printing.

5; Slow down the printing process.

      Excessive printing speed is also likely to cause bending deformation of 3d printing model. The slower speed allows the model to be better attached to the platform, and the finer the model is printed.

6. Keep 3D printer platform clean,

      If the 3d printer platform is very dirty, then the 3d printing model is also difficult to adhere to the platform, so be sure to clean up.

7. Reduce the fill.

      Generally, The filling rate of 3D printers is between 0% and 100%.The more plastic you use, the more the plastic cools, and the pulling force it creates against the shape itself, so reducing the material also reduces the chances of deformation and bending.