Hair dryer prototype

Name:      Hair dryer  prototype

Category:  Crafts

SIZE:          105mm*235mm*60mm

Finishing:  Polishing

What  kind of prototype aresuitable for SLS processing method  to make?

◆ Precise dimensions are required;

◆High-temperature resistance during functional test are required;

◆Impact-resistance during functional test are required;

The data you need to provide to us if you adopt SLS  prototyping processing:

◆First, Please send us 3D drawing with entitydiagram;

◆Second, change the 3d drawing to picture of the suffix STL;

Pay attention: Should change thechord height andangle control of the STL dialog deviation control options to0.0000 duringconversion.

before adjusting (coarse)                after adjusting(smooth)

The difference between SLS and SLA:

◆The material is different, SLS sintering adopt PA powder to process, whereas SLA adopt photosensitive resin.

◆SLS prototype can resist high temperature and impact powder, and the strength is good. ButSLA is easy to deform when the temperature over 60 degree celsius, and the strength is poor ,easy to break.

◆The surface post–processing treatment of SLS is less convenient than SLA ;

 CNC Prototype is very good in bothperformance;

SLS prototyping processing principle

      SLS is the abbreviation of  stereolithography, In popular, that is programming the processing according the shape of the prototype ,and then guide the laser along the procedure specified path to scan the photosensitive resin layer by layer .The photosensitive resin are solidified into the solid irradiated by laser, then can process the prototype same as 3D picture.