CNC production is the use of CNC machines through the reduction of material manufacturing method to cut off the excess material such a way of prototype proofing.CNC processing speed, low cost, processing materials with high strength, high temperature resistance, high toughness, transparency and other requirements;Moreover, CNC model surface treatment can be varied.Such as polishing, painting, sandblasting, oxidation, polishing, screen printing, UV, electroplating, etc.Its effect can be completely equivalent to the mold products; Customers' creativity can be realized in the aspects of appearance, assembly and function verification. Therefore, CNC prototype processing is the main way of modern prototype proofing. 

       1. Inspect the appearance design to show the designer's creativity in kind, so as to find the deficiencies and defects in the design.

       2. inspect the structural and functional design,Intuitively reflect whether the structure is reasonable or not,Ease of installation, Identify engineering and process problems, optimize product structure and function.  

       3. Reduce the risk of direct mold opening, avoid losses and save development costs.

       4. Make use of prototype for preliminary publicity (such as attending exhibitions) before the development of molds and mass production preparation.

    Surface treatment: polishing, oil spraying, screen printing, sandblasting, polishing, electroplating, oxidation, radium carving, drawing, etching, etc.

   Duochuang prototype is mainly engaged in CNC processing of Metal and plastic prototype:

        Manufacturing scope: Household appliances electronic computer, digital communication,, communication products, medical equipment, fitness equipment, security products, vehicle products, copper /aluminum/iron CNC processing. 

        Surface treatment:Spray paint, screen printing, sand blasting, electroplating, bronzing, thunder carving, transparent, rubber paint, wire drawing, oxygen pole, etc.

        Materials used:ABS, PMMA, nylon, PC, steel, bakelite, copper, aluminum, soft rubber, etc.

        Vacuum casting:That is, the original edition is used to produce a silica gel mold in a vacuum tooling.And PU material was used for pouring in the vacuum tooling, so as to clone the same copy with the original edition. Due to the high speed and low cost, the development cost, cycle time and risk of the products are greatly reduced.